Prof Dr. Branko Matovic| solid state welding | Best Researcher Award

Posted on by Welding Conference

Prof Dr. Branko Matovic| solid state welding | Best Researcher Award

šŸ‘Øā€šŸ”¬ Prof. Dr. Branko Matović, an esteemed figure in the realm of solid-state welding, stands as a beacon of excellence in the field of materials science. As a recipient of the prestigious Best Researcher Award, his contributions have significantly impacted the landscape of scientific research. With a wealth of expertise, Prof. Matović is associated with the renowned Institut za Nuklearne Nauke Vinca (Institute of Nuclear Sciences Vinča) in Serbia.

šŸ¢ Situated in Vinča, the institute holds a prominent position in the scientific community, specializing in nuclear sciences and conducting groundbreaking research. Prof. Matović’s work, particularly in solid-state welding, reflects a dedication to advancing materials science and engineering.

šŸŒ His influence extends beyond traditional boundaries, evident in his presence on reputable platforms such as Scopus and Google Scholar. These profiles underscore his commitment to scholarly excellence and the global dissemination of research in the field of solid-state welding.

šŸš€ Committed to the pursuit of knowledge, Prof. Dr. Branko Matović’s association with the Institut za Nuklearne Nauke Vinca aligns seamlessly with the institution’s mission of fostering collaboration and innovation in nuclear sciences. Equipped with state-of-the-art facilities, the institute serves as a nucleus for scientific exploration, a fitting environment for a researcher of Prof. Matović’s caliber.

In summary, Prof. Dr. Branko Matović emerges as a distinguished figure in solid-state welding, leaving an indelible mark on the scientific community through his noteworthy contributions and receiving acclaim with the Best Researcher Award.

Professional Profiles:

Education:

šŸ¢ The Institut za Nuklearne Nauke Vinca (Institute of Nuclear Sciences Vinča) holds a prominent position in the scientific landscape as a leading research institution in Serbia. Situated in Vinča, the institute specializes in nuclear sciences, conducting cutting-edge research and contributing to advancements in the field. šŸš€ Equipped with state-of-the-art facilities, the institute serves as a nucleus for scientific exploration, fostering collaboration and innovation in nuclear sciences. šŸŒ Committed to the pursuit of knowledge, the Institut za Nuklearne

Publication Top Notes:

Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures

Citation : 234

Anti-cancer effects of cerium oxide nanoparticles and its intracellular redox activity

Citation : 176

Suppression of inherent ferromagnetism in Pr-doped CeO 2 nanocrystals

Citation : 172

The size and strain effects on the Raman spectra of Ce1āˆ’ xNdxO2āˆ’ Ī“ (0ā‰¤ xā‰¤ 0.25) nanopowders

Citation : 169

Dense and near-net-shape fabrication of Si3N4 ceramics

Citation : 137

Prof. Mustapha SAHAl | Multidisciplinary| Top Researcher Award

Posted on by Welding Conference

Prof. Mustapha SAHAl | Multidisciplinary| Top Researcher Award

šŸ‘Øā€šŸ« Professor Mustapha Sahal is a distinguished academic and a recipient of the Top Researcher Award, showcasing his exceptional contributions to multidisciplinary research. Currently affiliated with UniversitĆ© Ibn Zohr in Agadir, Morocco, Prof. Sahal has become a leading figure in the academic landscape.

šŸŽ“ With a commitment to excellence, he has played a pivotal role in shaping the intellectual landscape at UniversitĆ© Ibn Zohr. The institution, situated in the vibrant city of Agadir, stands as a testament to academic brilliance and cultural richness. Prof. Sahal’s dedication to fostering knowledge, innovation, and community engagement aligns seamlessly with the university’s mission.

šŸ›ļø Nestled in the heart of Morocco, UniversitĆ© Ibn Zohr serves as a hub for academic exploration and research endeavors. Prof. Sahal’s influence extends beyond traditional disciplinary boundaries, reflecting his multidisciplinary approach to scholarship.

šŸŒ As evidenced by his presence on reputable platforms such as Scopus, ORCID, and ResearchGate, Prof. Mustapha Sahal is actively engaged in disseminating and advancing knowledge. His professional profiles underscore his commitment to scholarly excellence and the global dissemination of research.

šŸŒŸ Named after the renowned scholar Ibn Zohr, the university embodies a dedication to the pursuit of wisdom and enlightenment. Prof. Sahal’s role in this educational institution reflects not only his academic prowess but also his commitment to the holistic development of students.

In summary, Professor Mustapha Sahal stands as a beacon of academic achievement, contributing significantly to the multidisciplinary realm and leaving an indelible mark on the educational landscape at UniversitƩ Ibn Zohr.

Professional Profiles:

Education:

šŸ›ļø Nestled in the vibrant city of Agadir, Morocco, UniversitĆ© Ibn Zohr stands as a beacon of academic excellence and cultural richness. Established with a commitment to fostering knowledge, innovation, and community engagement, the university offers a diverse range of academic programs across various disciplines. With state-of-the-art facilities and a dynamic learning environment, UniversitĆ© Ibn Zohr serves as a hub for intellectual exploration, research endeavors, and the holistic development of its students. The institution, named after the renowned scholar Ibn Zohr, symbolizes a dedication to the pursuit of wisdom and enlightenment, contributing significantly to the educational landscape in the region. šŸŒšŸ“š

Professional:

šŸ‘Øā€šŸ« Depuis 2022, je suis honorĆ© de servir en tant que Chef de l’Ć©quipe de recherche “MatĆ©riaux, Energie et SystĆØmes EmbarquĆ©s” (MESE) Ć  la FacultĆ© Polydisciplinaire de Ouarzazate, au sein de l’UniversitĆ© Ibn Zohr Ć  Agadir, au Maroc. Cette position me permet de guider une Ć©quipe dynamique dans l’exploration de domaines clĆ©s liĆ©s aux matĆ©riaux, Ć  l’Ć©nergie et aux systĆØmes embarquĆ©s, contribuant ainsi Ć  l’avancement de la recherche scientifique.

šŸŽ“ Depuis 2020, je suis Ć©galement honorĆ© de dĆ©tenir le titre de Professeur de l’enseignement supĆ©rieur HabilitĆ© au sein de la mĆŖme facultĆ©. Cette reconnaissance tĆ©moigne de mon engagement continu envers l’Ć©ducation supĆ©rieure et souligne ma contribution Ć  l’enrichissement du corps professoral.

šŸ“š De 2013 Ć  2020, j’ai eu le privilĆØge de servir en tant que Professeur de l’enseignement supĆ©rieur assistant Ć  la FacultĆ© Polydisciplinaire de Ouarzazate, oĆ¹ j’ai consacrĆ© mes efforts Ć  l’enseignement et Ć  la formation des Ć©tudiants. Cette pĆ©riode a Ć©tĆ© marquĆ©e par un dĆ©vouement constant envers l’Ć©ducation et le dĆ©veloppement acadĆ©mique, renforƧant ainsi mon engagement envers la mission Ć©ducative de l’UniversitĆ© Ibn Zohr. šŸŒŸ

Publication Top Notes:

Dr. Janire Gordon Isasi | Marketing| Excellence in Research

Posted on by Welding Conference

Dr. Janire Gordon Isasi | Marketing| Excellence in Research

Dr. Janire Gordon Isasi,Universidad de Deusto, Spain

Dr. Janire Gordon Isasi is an accomplished academic with a diverse background in Marketing and Communication. Currently affiliated with the Universidad de Deusto in Spain, she holds a Doctorate in Marketing and Communication from Deusto Business School, awarded with the highest distinction of “Cum laude por unanimidad” in 2020. Driven by a passion for research, her doctoral journey, conducted within the Competitividad Empresarial y Territorial, InnovaciĆ³n y Sostenibilidad program, focused on Integrated Marketing Communication (IMC) and its impact on Higher Education.

Prior to her doctoral pursuits, Dr. Gordon Isasi earned a Master’s degree in Global Marketing Management and New Markets from the Universidad Camilo JosĆ© Cela. Her exceptional thesis in this program explored the international dynamics of City Marketing. Subsequently, she pursued an MBA in Business Management and Administration at the Esden Business School, where her outstanding project involved creating a business plan for an online apparel purchase application utilizing 3D scanning technology.

Demonstrating her commitment to academic excellence, Dr. Gordon Isasi achieved a Diploma in Business from the University of Cambridge International Examinations. Her educational journey also includes a degree in Industrial Organization from the Universidad de Deusto, marked by a notable final project focused on an application designed to attract pre-university students. Furthermore, she holds a degree in Technical Telecommunication Engineering with a specialization in telematics, highlighted by the outstanding project “Underground Mobipay,” which earned an impressive grade of 9.8.

Dr. Janire Gordon Isasi’s biography showcases her dedication to academic and research pursuits, emphasizing her expertise in Marketing, Communication, and her innovative contributions in the realms of technology and engineering.

 

Professional Profiles:

ORCID

Education:

šŸŽ“ My academic journey reflects a diverse and accomplished path, culminating in a Doctorate in Marketing and Communication from Deusto Business School at the Universidad de Deusto. Enrolled in the Competitividad Empresarial y Territorial, InnovaciĆ³n y Sostenibilidad program, my doctoral research delved into the Integrated Marketing Communication (IMC), specifically assessing its impact and performance in Higher Education. Awarded the distinction of “Cum laude por unanimidad,” my doctoral journey spanned from 2015 to 2020.

šŸŒ Prior to my doctoral pursuits, I earned a Master’s degree in Global Marketing Management and New Markets from the Universidad Camilo JosĆ© Cela, where my outstanding thesis focused on the international dynamics of City Marketing. This was followed by an MBA in Business Management and Administration from the Esden Business School, where my exceptional project involved devising a business plan for an online apparel purchase application utilizing 3D scanning technology.

šŸ“š My commitment to academic excellence is underscored by a Diploma in Business from the University of Cambridge International Examinations, where I excelled in subjects ranging from organizational management and effective business communication to human resources and marketing.

šŸ”§ My engineering background includes a degree in Industrial Organization from the Universidad de Deusto, where my notable final project centered around an application designed to attract pre-university students. Additionally, I hold a degree in Technical Telecommunication Engineering with a specialization in telematics, marked by a standout project named “Underground Mobipay,” focusing on NFC technology for public transportation access and reloads. Awarded an impressive grade of 9.8, my journey in engineering reflects both innovation and excellence.

Professional:

šŸ“š Immersed in the vibrant academic environment of the Universidad de Deusto, I actively contribute to various programs and faculties, fostering a culture of innovation and entrepreneurship. Currently pursuing a Bachelor’s degree in Industrial Technologies and a Master’s in Industrial Engineering with a focus on Technological Innovation and Entrepreneurship, my academic journey from 2021 onwards reflects a commitment to staying at the forefront of technological advancements.

šŸš€ My involvement extends beyond traditional coursework, as I play a pivotal role in the Master Dual en Emprendimiento en AcciĆ³n. Serving as the Coordinator, I am responsible for the methodological aspects and direction in executing the three modules, with a special emphasis on the Design Thinking methodology. This comprehensive approach ensures that students are equipped not only with theoretical knowledge but also with practical skills essential for entrepreneurial success.

šŸŽ“ Additionally, my engagement spans diverse disciplines, including contributions to the Grado en DiseƱo Industrial and Grado en OrganizaciĆ³n Industrial. From teaching creativity and business planning to exploring business models and effective communication, I strive to instill a holistic understanding of these subjects.

šŸ’¼ Within the Facultad de Ciencias EconĆ³micas y Empresariales, my involvement in the Grado en AdministraciĆ³n y DirecciĆ³n de Empresas + DirecciĆ³n de Entornos Digitales and MĆ”ster Universitario en Marketing Avanzado showcases my dedication to merging traditional business practices with contemporary digital strategies.

šŸŒ My commitment to fostering an entrepreneurial spirit extends to various faculties, including the Facultad de Ciencias Sociales y Humanas and the Grado en Turismo. From teaching entrepreneurship and creativity to participating in the design of course content related to digital marketing and social media, I am actively involved in shaping the next generation of innovative thinkers.

šŸš€ Beyond traditional academics, my coordination and teaching roles in programs such as DeustoSTART, Programa de Emprendimiento Juvenil, B-Venture, and Semana Deusto Emprende highlight my dedication to promoting entrepreneurship and digital marketing skills. Through these initiatives, I aim to inspire and equip students with the tools and mindset necessary for success in the ever-evolving business landscape.

Publication Top Notes:

Creating student value in higher education through customer-centric integrated marketing communication

An exploratory approach of the association between integrated marketing communication and business performance in higher education institutions

Revisiting integrated marketing communication (IMC): A scale to assess IMC in higher education (HE)

Dr.Andrea Dzubinska | Magnetism | Best Researcher Award

Posted on by Welding Conference

Dr.Andrea Dzubinska | Magnetism | Best Researcher Award

Researcher at University of Pavol Jozef Safarik in Kosice, Slovakia

Dr. Andrea Dzubinska, a distinguished researcher in the field of magnetism, stands as a beacon of academic excellence. Embarking on her educational journey in Santander, Spain, she earned her Ph.D. in Science and Technology from the Universidad de Cantabria between 2017 and 2020. Delving into the intricacies of Advanced Materials, she furthered her pursuit with a second Ph.D. from the University of P. J. Å afĆ”rik in KoÅ”ice, Slovakia, between 2016 and 2020, earning the title of RNDr. in Physics during this period. Driven by a passion for education, she honed her skills in Physical Engineering of Advanced Materials, obtaining an Ing. degree from the University of PreÅ”ov in 2018. Committed to the sciences, she achieved an Mgr. degree in Teaching Biology and Physics from the University of PreÅ”ov in 2016 and a Bc. degree in Teaching Biology and Physics in 2014. Dr. Dzubinska’s educational foundation was laid at GymnĆ”zium and ZÅ  sv. MikulĆ”Å”a in Slovakia, where she completed an Eight-Year High School with Matriculation Exam (Honors) between 2002 and 2010. Her journey reflects not only a profound dedication to learning but also a commitment to excellence, earning her recognition such as the Best Researcher Award in Magnetism. Currently a researcher at the University of Pavol Jozef Å afĆ”rik in KoÅ”ice, Slovakia, Dr. Andrea Dzubinska continues to contribute significantly to the advancement of knowledge in her field.

Professional Profiles:

Education:

šŸŽ“ Embarking on a journey of academic excellence, I pursued my educational aspirations with dedication and passion. In the picturesque city of Santander, Spain, I earned my Ph.D. in Science and Technology from the esteemed Facultad de Ciencia at the Universidad de Cantabria between 2017 and 2020.

šŸ”¬ My quest for knowledge continued as I delved into the intricacies of Advanced Materials, earning another Ph.D. from the Faculty of Science at the University of P. J. Å afĆ”rik in KoÅ”ice, Slovak Republic, spanning the years 2016 to 2020. During this time, I also attained the title of RNDr. in Physics from the same institution between 2016 and 2018.

šŸ’” Prior to my Ph.D. pursuits, I honed my skills in Physical Engineering of Advanced Materials, earning an Ing. degree from the Faculty of Humanities and Natural Sciences at the University of PreÅ”ov in 2018. This period marked a significant step in my academic journey.

šŸ“š My commitment to education and the sciences is underscored by my achievements in Teaching Biology and Physics. I obtained an Mgr. degree from the Faculty of Humanities and Natural Sciences at the University of PreÅ”ov in 2016, following my earlier attainment of a Bc. degree in Teaching Biology and Physics in 2014.

šŸ« My educational foundation was laid at GymnĆ”zium and ZÅ  sv. MikulĆ”Å”a in Slovakia, where I completed an Eight-Year High School with Matriculation Exam (Honors) between 2002 and 2010. This formative period set the stage for my academic journey, instilling in me a love for learning and a commitment to excellence.

Work experience:

šŸ”¬ Since September 2020, I have been immersed in the world of research as a dedicated Researcher at CPM-TIP, UPJÅ  (Center for Polymeric Materials – Technological Institute of Physics) where I actively contribute to advancing scientific knowledge and technological innovations. My role involves delving into the intricate realms of materials science and physics.

šŸŽ“ Concurrently, from October 2019 to the present, I have been sharing my expertise as a Lecturer for Medicine (Physics) at Scintio s.r.o, bringing the fascinating intersection of physics and medicine to aspiring minds. This teaching role allows me to bridge the gap between theoretical knowledge and its practical applications in the medical field.

šŸŒ Between May 2022 and December 2023, I expanded my research horizons as a Researcher at CVTI, SR (Center for Scientific and Technical Information of the Slovak Republic), contributing to the broader scientific community by engaging in impactful research initiatives.

šŸ“š In a brief yet impactful period from February 2018 to June 2018, I served as a Lecturer for Medicine (Biology) at Scintio s.r.o, broadening my teaching scope to the biological aspects of medicine. This experience enhanced my ability to communicate complex biological concepts to students, fostering a deeper understanding of the interplay between biology and medical sciences.

Skills:

šŸ’» Proficient in navigating the digital landscape, my skill set encompasses advanced proficiency in both ORIGIN and KaleidaGraph, powerful tools for data analysis and visualization. These platforms empower me to derive meaningful insights from complex datasets, facilitating a deeper understanding of scientific and analytical endeavors.

šŸ“Š Additionally, I possess advanced proficiency in Microsoft Office, leveraging its suite of applications to streamline tasks and enhance productivity. Whether crafting compelling presentations in PowerPoint, managing data in Excel, or creating comprehensive documents in Word, my adeptness in Microsoft Office ensures seamless execution of various professional tasks.

šŸ§® While my primary expertise lies in ORIGIN, KaleidaGraph, and Microsoft Office, I also hold a foundational understanding of MATLAB. Although at a basic level, my familiarity with MATLAB allows me to engage with its capabilities for numerical computing and algorithm development, adding versatility to my analytical toolkit. This combination of advanced and foundational skills equips me to tackle diverse challenges and contribute effectively to analytical and research-oriented projects.

Publications:

Prof Dr. InĆ©s KĆ¼ster Boluda | Marketing| Top Researcher Award

Posted on by Welding Conference

Prof Dr. InĆ©s KĆ¼ster Boluda | Marketing| Top Researcher Award

Ā  ProfesorĀ  at Universidad de Valencia,spain

šŸ‘Øā€šŸŽ“ Prof Dr. InĆ©s KĆ¼ster Boluda is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

I completed my undergraduate studies (1st and 2nd cycle, and former cycles like Bachelor’s, Diplomas, Senior Engineers, Technical Engineers, Architects) and received a Bachelor’s Degree / Diploma / Bachelor’s Degree from the Faculty of Economics. My degree title is Bachelor of Science in Economics and Business Administration, and I graduated on 30/06/1993.

In addition to my undergraduate studies, I pursued doctoral studies in the field of Economics and Business Administration. I completed a Doctoral Program and was awarded a Doctorate in Economics and Business Administration from the Faculty of Economics, which is a university institution. I graduated on 21/09/2019.

Professional:

Currently, I am serving as the Representative of the Department of Marketing and Market Research in the Sustainability Committee of the Faculty of Economics at the University of Valencia, a position I have held since 2022. Prior to this role, I worked as the Coordinator of the Academic Committee of the Doctoral Program in Marketing at the University of Valencia, starting from March 21, 2017.

Before that, I served as a Member of the Academic Committee of the Doctoral Program in Marketing at the University of Valencia, beginning on December 16, 2013. During this time, I was affiliated with the Faculty of Economics at the University of Valencia, specifically in the Department of Marketing and Market Research. My professional journey at the University of Valencia began in 2012 when I became a Member of the Faculty Board of the Faculty of Economics. In this capacity, I contributed to the academic and administrative aspects of the faculty, focusing on the fields of Economics, Marketing, and Market Research.

InĆ©s KĆ¼ster Boluda ā€˜s citation metrics and indices from Google Scholar are as follows:
  • Cited by: All: 3734, Since 2063: 1756
  • Citations: 3734(All), 1756(Since 2018)
  • h-index: 33 (All), 23 (Since 2018)
  • i10-index: 70(All), 49 (Since 2018)
InĆ©s KĆ¼ster Boluda has contributed to several publications in the field of solar energy, photovoltaics, thermal systems, and weldingĀ  applications. Here are some of his notable publications:

 

Job titles and activities:

Currently, I am serving as a Lecturer in Biomedical Science since March 2023. In this role, I teach medical biochemistry, clinical biochemistry, and diagnostic hematology at both bachelor’s and master’s levels. Additionally, I am involved in conducting research projects and supervising research students.

Before this, from October 2021 to March 2023, I worked as a Clinical Trial Associate at Avance Clinical Research. During my tenure, I was responsible for coordinating and managing clinical trials in Australia and New Zealand.

Prior to that, from July 2013 to March 2017, I held the position of Lecturer and Clinical Biochemist. Although specific responsibilities were not provided, this role likely involved teaching and research in the field of clinical biochemistry.

Publication Top Notes:

Prof Dr. Takashiro Akitsu | Chemistry | Best Researcher Award

Posted on by Welding Conference

Dr. Gilberto Rosales MarĆ­n | MinerĆ­a y Metalurgia | Best Researcher Award

Ā  ProfesorĀ  at Tokyo University of Science, Japan

šŸ‘Øā€šŸŽ“ Prof Dr. Takashiro Akitsu is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

I obtained my B.Sc. in Chemistry in 1995 from the Department of Chemistry, Faculty of Science, Osaka University, Japan. Subsequently, I pursued my M.Sc. in Inorganic and Physical Chemistry, graduating in 1997 from the Department of Chemistry, Graduate School of Science, Osaka University, Japan. Continuing my academic journey, I completed my Ph.D. in Chemistry in 2000, also at Osaka University, with a thesis titled ā€œStudies on structures and electronic states of copper(II) complexes with imidate ligands.ā€ During my doctoral research, I was under the supervision of Prof. Yoshihiko Kushi and Prof. Seiko Komorita. My research involved the preparation of metal complexes, X-ray crystallography, (polarized) electronic spectroscopy, and theoretical calculations using the AOM method.

 

Academic Carrier :

From 2000 to 2002, I served as a Postdoctoral Researcher at the Institute for Protein Research, Osaka University, Japan, under the guidance of Prof. Tomitake Tsukihara. During this time, my focus was on the structural biology and bioinorganic chemistry of metalloproteins, with a specific emphasis on conducting X-ray crystallography studies of cytochrome c oxidase.

Following my postdoctoral position, I worked as a Research Associate at the Department of Chemistry, Keio University, Japan, from 2002 to 2007, under the supervision of Prof. Yasuaki Einaga. Here, my research centered on photo-magnetic metal complexes and their applications in nano-scaled functional materials. I specifically investigated Prussian blue analogues and other metal complexes during this period. Additionally, I briefly held the position of Assistant Professor at Keio University from 2007 to 2008.

In 2007, I expanded my research experience by taking on the role of Visiting Scholar at the Department of Chemistry, Faculty of Humanities and Sciences, Stanford University, USA, under the mentorship of Prof. Edward I. Solomon. During this time, I focused on bioinorganic spectroscopy of multicopper oxidase

Activities:

Throughout my career, I have been actively involved in various editorial and committee roles in the field of chemistry, contributing to the advancement of scientific knowledge and publication. Here is a summary of my professional contributions:

  • From 1997 to 1999, I served as the Manager of the Young Coordination Chemist’s Association Japan, Kinki branch, where I played a key role in fostering collaboration and networking among young professionals in the field of coordination chemistry.
  • In 2006 and 2007, I served as a Guest Editor for a special issue of Metal Based Drugs, leveraging my expertise to curate and contribute to the publication of research in this area.
  • In 2009, I extended my editorial contributions as a Guest Editor for a special issue of Asian Chemistry Letters, showcasing my commitment to promoting impactful research.
  • Since 2009, I have been an esteemed member of the Editorial Board of Asian Chemistry Letters, contributing my expertise to the publication process and ensuring the quality of scientific content.
  • Additionally, I have been an active member of the Editorial Board of the International Journal of Current Chemistry since 2009, where I have played a crucial role in shaping the direction of the journal and maintaining its high standards.
  • From 2009 to 2010, I served on the Editorial Board of the Journal of the Crystallographic Society of Japan, where I contributed to the review and selection of high-quality research articles.
  • In 2010, I expanded my editorial roles by serving as a Guest Editor for a special issue of Current Physical Chemistry, further showcasing my dedication to advancing the field through impactful publications.
  • Throughout the years, I have continued to expand my editorial engagements, serving on the editorial boards of various esteemed journals such as Advances in Chemistry, Frontiers in Green and Environmental Chemistry, and Science Postprint, among others.
  • My editorial contributions also extend to international collaborations, as evidenced by my role as an International Advisor/Editor to the Journal of the Indian Chemical Society, where I have contributed to fostering global scientific exchange.
  • In 2023, I am slated to take on the role of Co-editor of Acta Crystallographica E, where I will continue my commitment to advancing the field of crystallography through impactful publications.

Awards:

In 2010, I delivered an outstanding invited lecture at GTGE2010, the international conference on green chemistry in India, where I showcased my expertise and contributed to the exchange of knowledge in the field.

In December 2014, I was honored with the Dr. Radhakanta Kajal Sen Merit Scholarship Award at the 4th World Science Congress held at Jadavpur University, recognizing my significant contributions to the field of science. In June 2018, I received a Certificate of Recognition for delivering a keynote lecture at Chemical Science 2018, organized by EuroSciCon. This recognition underscored the impact of my contributions to the conference and the field of chemical science.

In September 2018, I was awarded the prestigious title of Professor of the Year in the Biomaterials category at the Venus International Healthcare Awards (VIHA 2018), acknowledging my exceptional work and leadership in this specialized area of study. Also in September 2018, I received the Publons Peer Review Awards 2018 in chemistry from Publons, recognizing my outstanding contributions to peer review in the field of chemistry. This award highlighted my dedication to ensuring the quality and integrity of scientific publications through rigorous peer review processes.

Publications:

Deep-learning prediction of safety moiety of salen-type complex crystals towards explosive perchlorate salts

Toward flame retardants or thermal stabilizers with new mechanism for polymer

From Basics of Coordination Chemistry to Understanding Cisplatin-analogue Pt Drugs

Crystal structure and Hirshfeld surface analysis of (1H-imidazole-ĪŗN 3)[N-(2-oxidobenzylidene)tyrosinato-Īŗ3 O,N,Oā€²]copper(II)

Inversely Finding Peculiar Reaction Conditions toward Microfluidic Droplet Synthesis

Dr. Gilberto Rosales MarĆ­n | MinerĆ­a y Metalurgia | Best Researcher Award

Posted on by Welding Conference

Dr. Gilberto Rosales MarĆ­n | MinerĆ­a y Metalurgia | Best Researcher Award

Ā  Profesor Investigador at Universidad AutĆ³noma de San Luis PotosĆ­, Mexico

šŸ‘Øā€šŸŽ“ Dr. Gilberto Rosales MarĆ­n is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

I hold a Doctorate in Mineral Engineering from Universidad AutĆ³noma de San Luis PotosĆ­, a Master’s in Mineral Engineering from the same university, and a Bachelor’s in Metallurgical and Materials Engineering, also from Universidad AutĆ³noma de San Luis PotosĆ­.

 

Professional Trajectory:

I began my professional journey as a Lecturer on August 10, 2004, at the Universidad AutĆ³noma de San Luis PotosĆ­. Following that, I received a scholarship on August 24, 2007. During my tenure, I had the opportunity to update the Laboratory Practice Manual and teach as an Hourly Class Teacher starting from May 22, 2015, focusing on Software Application Programming. My career progressed, and I assumed the role of Technical Manager on January 1, 2016, while continuing to serve as a Full-time Professor at the Universidad AutĆ³noma de San Luis PotosĆ­.

Participation in Conferences:

In Mexico, I have actively participated in various conferences focusing on mineral processing and engineering. In 2012, I delivered a presentation titled “Determination of Fracture Parameters” at the XVI Meeting on Mineral Processing. The subsequent year, in 2013, I contributed to the “National Week of Science and Technology” with a presentation titled “Mathematical Simulation of Processes: A Tool for the Immediate Future.” Then, in 2014, I presented my research on the “Design and Construction of a Laboratory High-Pressure Grinding Roll Mill” at the International Minerals Engineering Congress. Furthermore, during the same congress, I also presented on the “Effect of the Lifter Face Angle on the Breakage Kinetics in Tumbling Mills.”

Publications:

Estimation methodology for Bond ball mill work index experiment output via mathematical modeling

Ā study of the effect of the mineral feed size distribution on a ball mill using mathematical modeling

Study of lifter wear and breakage rates for different lifter geometries in tumbling mill: Experimental and simulation analysis using population balance model

Prediction of a pistonā€“die press product using batch population balance model

CFD analysis to study the effect of design variables on the particle cut size in hydrocyclones

Dr. Ali Heidary Moghada | friction stir spot welding | Best Researcher Award

Posted on by Welding Conference

Dr. Ali Heidary Moghada | friction stir spot welding | Best Researcher Award

Educational and Skill Assistant at Islamic Azad University, Iran

šŸ‘Øā€šŸŽ“ Dr. Ali Heidary Moghada is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

The user’s educational background includes a Ph.D. in Advanced Materials Engineering and Metallurgy from the University of Tehran, Iran, in 1151 (Persian calendar, which corresponds to approximately 2012 in the Gregorian calendar). They also hold a Master’s degree in Materials Engineering and Metallurgy with a focus on Metal Extraction from Isfahan University of Technology, Iran, in 1106, and a Bachelor’s degree in Industrial Metallurgy from Shiraz University, Iran, in 1104.

 

Research projects:

The projects detailed include the construction of various devices such as sintering machines, strength testing machines, coke testing machines, jaminie testing machines, granulators, and palletizers for use in laboratories focused on metal extraction and thermal operations. These projects were executed by Ali Heidari Moghadam at the Islamic Azad University, Dezful Branch, resulting in the construction of a Box Glove device for laboratory use. Additionally, Morteza Shemayanian led a project at the Isfahan Iron Melt Company investigating the effect of initial particle size on sintering processes’ quality. Another project at the same company, led by Ali Heidari Moghadam, studied the impact of adding coke time on the initial load of the sintering process. Meisam Haji Lori oversaw projects at the Petrochemical Arvand Company, focusing on recycling used gamma-alumina catalysts and studying the effects of temperature and time of acidification on the process. Furthermore, a project at the Islamic Azad University, Dezful Branch, led by Vahid Khoramshahi, involved the design and construction of a gas sensor test device. Lastly, Ali Heidari Moghadam headed a project at the Khuzestan Gas Company, examining the tensile strength and hardness of carbon steel in the HAZ area and investigating the effect of welding speed on these properties. Additionally, there are two rows discussing completed research projects that have reached technology and projects with innovative and innovative features, focusing on the commercialization of knowledge-based companies and the construction and examination of zirconium-cobalt-rare earth alloys for use in vacuum chambers, both conducted at the Iran Scientific and Industrial Research Organization.

Ā Innovative:

Manshoor Sanat, located at Dezful Growth Center in the Khuzestan Science and Technology Park (4931 4939), specializes in the technical manufacturing of lightweight polymer composite parts designed to serve as corrosion-resistant and flame-resistant structures for the oil industry. Their expertise lies in creating advanced materials that can withstand the harsh conditions often encountered in the oil and gas sector, providing durable solutions for infrastructure within this industry.

In addition to their expertise in composite material manufacturing, Manshoor Sanat is also involved in the construction and examination of composite reinforcement properties using the filament winding method. This process involves winding continuous fibers around a rotating mandrel in a precise pattern to create strong and lightweight composite structures. Their work in this area contributes to the development of innovative and efficient manufacturing techniques for composite materials, ensuring high-quality products for various industrial applications.

Publications:

Effect of pin geometry, rotational speed, and dwell time of tool in dissimilar joints of low-carbon galvanized steel and aluminum 6061-T6 by friction stir spot welding

Facile solution-based synthesis of impurity-free hydroxyapatite nanocrystals at ambient conditions

Tetragonality enhancement in BaTiO3Ā by mechanical activation of the starting BaCO3Ā and TiO2Ā powders: Characterization of the contribution of the mechanical activation and postmilling calcination phenomena

Obtaining the highly pure barium titanate nanocrystals by a new approach

Effect of re elements on the sorption properties of nanocrystalline Zr-Co getters prepared by mechanical alloying

Dr. Anthony Chukwunonso Opia | Lubrications | Excellence in Research

Posted on by Welding Conference

Dr. Anthony Chukwunonso Opia | Lubrications | Excellence in Research

Postdoc researcher atUniversiti Teknikal Malaysia Melaka, Malaysia

šŸ‘Øā€šŸŽ“ Assoc Prof Dr. Anthony Chukwunonso Opia is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

From February 2019 to July 2022, I pursued my Doctor of Philosophy (PhD) in the School of Mechanical Engineering at the Faculty of Engineering, Universiti Teknologi Malaysia. My dissertation focused on enhancing the tribological performance of rapeseed bio-lubricants using modified Eichhornia crassipes nanoparticles additives. Prior to this, I completed my Master of Engineering in Mechanical Engineering with a Thermo-fluid option at the University of Port Harcourt, Rivers State, Nigeria, from April 2014 to June 2017. My academic journey began with a Bachelor of Engineering in Marine Engineering from Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria, which I completed from March 2003 to November 2008.

 

EXPERIENCE:

From February 2019 to July 2022, I pursued my doctoral studies at the Automotive Development Centre, School of Mechanical Engineering, Universiti Teknologi Malaysia (UTM) in Johor Bahru, Malaysia. My research focused on the tribological performance enhancement of rapeseed bio-lubricants using modified Eichhornia crassipes nanoparticles additives. Since September 2018, I have been serving as a Lecturer in the Department of Marine/Mechanical Engineering at Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria. In this role, I have taught courses such as Power Plant Engineering, Engineering Thermodynamics, and Thermo-fluid Engineering. Additionally, I have worked as a Postdoctoral Researcher at the Centre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia, focusing on the formulation and testing of eco-friendly nano-lubricants for electric vehicle applications.

RESEARCH INTEREST:

My expertise lies in the field of tribology, which encompasses various aspects of friction, lubrication, and wear in mechanical systems. I have specialized knowledge in bio-lubricants, particularly in their formulation and application. My research includes the development of additives using nanotechnology to enhance the performance of lubricants. Additionally, I have studied the effects of dry friction and wear on different materials, with a focus on understanding surface modification techniques to improve their tribological properties.

Anthony Chukwunonso OpiaĀ ā€˜s citation metrics and indices from Google Scholar are as follows:
  • Cited by: All: 263, Since 2063: 80
  • Citations: 263(All), 263(Since 2018)
  • h-index: 10 (All), 10 (Since 2018)
  • i10-index: 10(All), 10 (Since 2018)
Anthony Chukwunonso Opia has contributed to several publications in the field of solar energy, photovoltaics, thermal systems, and weldingĀ  applications. Here are some of his notable publications:

Publications:

Biomass as a potential source of sustainable fuel, chemical and tribological materialsā€“Overview

  • Published in Energy in 2021 with 43 citations.

Electric vehicle in Malaysia and Indonesia: Opportunities and challenges

Assoc Prof Dr. Abdel-Razzak Al-Hinnawi | Medical Image | Outstanding Scientist Award

Posted on by Welding Conference

Assoc Prof Dr. Abdel-Razzak Al-Hinnawi | Medical Image | Outstanding Scientist Award

Ā Isra University ,JordanĀ 

šŸ‘Øā€šŸŽ“ Assoc Prof Dr. OLUSOLA OLUJOBI is a seasoned professional with nearly two decades of global experience in higher education and business. As the Director of the UAEU (CBE) Off-Campus Site in Abu Dhabi, he currently serves as the MBA program coordinator, overseeing industry-oriented post-graduate programs and the Executive Education Unit.

šŸ† In 2014, during his tenure as the College Dean of EIC ā€“ Abu Dhabi, the institution earned the prestigious Award of Educational Innovation from the Worldwide Hospitality Award in Paris. His leadership extended to successful reauthorization, re-licensure, and re-accreditation projects for all programs under the Commission of Academic Accreditation (CAA-MoE).

Professional Profiles:

Education:

I hold a Ph.D. in Bio-medical Physics and Bioengineering, which I obtained in 1999 from the Department of Bio-Medical Physics and Bioengineering at the University of Aberdeen, Scotland, UK. My doctoral thesis focused on “Computer Aided Detection of Clustered Micro-Calcification in the Digitised Mammogram,” and my specialization involved applying Digital Image Analysis to Medical Images. Prior to this, I completed an M.Sc. in Medical Imaging from the same department at the University of Aberdeen in 1995. My master’s thesis was titled “Relaxation Times Measurements at 7 Tesla NMR experimental small animal system.” Additionally, I hold a B.Sc. in Bio-Medical Engineering, which I earned in 1991 from the Department of Bio-medical Engineering at Damascus University, Syria.

 

Academic Courses:

I have undertaken several professional development courses and training programs to enhance my skills and expertise in various areas. In 2006, I participated in a program on “Electronic Distance Learning using MOODLE technology” in Amman, Jordan. The same year, I was involved in the “Design and Development of Electronic Academic Courses” at Demorgan University, UK, while working at Kalamoon University in Damascus, Syria. In 2003, I attended a program on “Digital Image Processing (Application & Architecture)” at the Summer University held at the University of Balamand, Lebanon. In 2002, I completed a training course on the “Applications of Radio-Isotopes and Radiation Protection” at the MIDDLE EASTERN RADIO-ISOTOPES CENTER FOR ARAB COUNTRIES in Cairo, Egypt. Additionally, in 2000, I acquired “Basic Web Technology Skills for Courseware Development” through a UNESCO (Cairo Office) USEE Programme at the Arab School of Science and Technology in Damascus, Syria. These experiences have contributed to my professional growth and proficiency in various aspects of my field.

 

Academic Employment:

My academic and professional journey reflects my dedication to the field of biomedical engineering and medical imaging. From 1991 to 1994, I pursued my undergraduate studies at the Biomedical Engineering Department of Damascus University, Syria, where I focused on research in medical imaging, medical physics, and digital image processing. Subsequently, in 1994-1995, I continued my academic journey at the University of Aberdeen, UK, where I served as an Assistant Professor, Associate Professor, and Full-Time faculty member in the Department of Bio-Medical Physics and Bio-Engineering. During this time, my focus areas included digital image processing, medical imaging systems, and nuclear medicine.

Returning to Damascus University’s Biomedical Engineering Department in 1999, I continued my academic career as an Associate Professor, teaching courses in digital image processing, medical imaging systems, and computer applications in medical sciences. From 2004 to 2006, I expanded my teaching experience as a Lecturer at the Biomedical Engineering Department of Al-Ahliyya Amman University in Amman, Jordan. Here, I taught courses covering screen-film radiography, nuclear medicine imaging, digital radiography, quantitative analysis of medical images, radiation protection, and essentials of medical imaging.

Conferences:

I have contributed to the field of medical imaging through various publications and presentations. In 2006, I presented a paper titled “Current State of PET/CT Medical Imaging Scanner” at the International Medical Informatics and Biomedical Engineering Symposium (IMIBE’06) held at Yarmouk University. This paper was part of the first Jordanian European Symposium and provided insights into the advancements in PET/CT imaging technology.

In 1998, I co-authored a paper with Undrill PE and Needham G. titled “The auto-detection of cluster microcalcifications in digital mammograms using texture energy.” This paper was presented at the 4th International Workshop on Digital Mammography held in Nijmegen, Netherlands, and focused on the application of texture energy for the automatic detection of microcalcifications in digital mammograms.

Abdel-Razzak Al-Hinnawi ā€˜s citation metrics and indices from Google Scholar are as follows:
  • Cited by: All: 94, Since 2018: 80
  • Citations: 94(All), 80(Since 2018)
  • h-index: 6 (All), 5 (Since 2018)
  • i10-index: 3 (All), 2 (Since 2018)
Abdel-Razzak Al-Hinnawi has contributed to several publications in the field of solar energy, photovoltaics, thermal systems, and weldingĀ  applications. Here are some of his notable publications:

Publications:

An energy-autonomous smart shirt employing wearable sensors for usersā€™ safety and protection in hazardous workplacesā€

  • Published in Energy in 2022 with 12 citations.

A Framework Classification of Heart Sound Signals in PhysioNet Challenge 2016 Using High Order Statistics and Adaptive Neuro-Fuzzy Inference Systemā€

  • Published in Energy in 2020 with 18 citations.

Assessment of bilateral filter on 1/2-dose chest-pelvis CT views

  • Published in Energy in 2013 with 14 citations.

Optic nerve head slope-based quantitative parameters for identifying open-angle glaucoma on SPECTRALIS OCT imagesā€

  • Published in Energy in 2017 with 7 citations.

Ā A New Prototype of Smart Wearable Monitoring System Solution for Alzheimerā€™s Patientsā€

  • Published in Energy in 2021 with 6 citations.